Mining Electricity Cost Calculator

Calculate crypto mining electricity cost from wattage, rig count, hours per day, and $/kWh. Pick Antminer or Whatsminer presets or custom watts, use regional rate shortcuts, add optional daily revenue for net profit and break-even power price, and compare bills across common electricity rates.

Mining hardware

Use 24 for always-on; lower for time-of-use or curtailment.

Electricity rate

Paste revenue from our Bitcoin or multi-coin mining calculator to see profit and break-even $/kWh.

Rough emissions; use your utility or national grid average.

Electricity cost

Total power draw
3,500 W
Energy use
84 kWh/day
Power cost per day
$13.44
Per month (30 days)
$403.20

Approx. load (single-phase)

At 120 V: 29.2 A · At 240 V: 14.6 A

Planning estimate only — not electrical advice.

Cost by period

PeriodkWhPower cost
Day84$13.44
Week588$94.08
Month2,520$403.20
Year30,660$4,905.60

Cost at common $/kWh rates

Same watts and runtime — see how sensitive your bill is to power price.

$/kWhCost/dayCost/month
$0.05$4.20$126.00
$0.08$6.72$201.60
$0.10$8.40$252.00
$0.12$10.08$302.40
$0.15$12.60$378.00
$0.18$15.12$453.60
$0.22$18.48$554.40
$0.28$23.52$705.60

What your mining electricity cost means

Operating a proof-of-work miner is mostly paying for kilowatt-hours. This calculator turns nameplate wattage, how many machines you run, how long they are on each day, and your local $/kWh into a clear power bill — without needing network hashrate or coin prices. Add optional daily mining revenue (from our Bitcoin or multi-coin mining calculators) to see net profit after power and the break-even electricity price where revenue equals the bill. Use regional rate presets as starting points for the USA, EU, UK, Canada, Australia, Japan, Brazil, and India, then replace them with your utility tariff, time-of-use windows, or hosting contract. Amp estimates at 120 V and 240 V help with breaker planning; optional grid CO₂ factors give a rough emissions snapshot for sustainability reporting.

Formulas we use

Total watts = watts per rig × number of rigs. kWh per day = (total watts ÷ 1,000) × hours powered per day. Electricity cost per day = kWh per day × $/kWh. Cost for any period = daily cost × days (week = 7, month = 30, year = 365). Optional profit per day = daily mining revenue − daily electricity cost. Break-even $/kWh = daily revenue ÷ kWh per day (when revenue is entered). Approximate amps (single-phase) = total watts ÷ voltage (120 V or 240 V). CO₂ per day = kWh per day × kg CO₂ per kWh (when you enter a grid factor). The comparison table repeats the daily and 30-day bill at common $/kWh rates so you can see how sensitive mining is to power price.

Worked examples

  1. One Antminer S21 at $0.08/kWh, 24/7

    3,500 W, 1 unit, 24 h/day, $0.08/kWh.

    kWh/day = 3.5 × 24 = 84. Cost/day = 84 × $0.08 = $6.72. Month ≈ $201.60.

    At 200 TH/s you might earn ~$14/day in BTC revenue in a favorable market — profit depends on live difficulty and price; enter your revenue to see net.

  2. Farm of ten S19 XPs

    3,010 W each, 10 units, 24 h/day, $0.12/kWh.

    Total 30,100 W → 722.4 kWh/day. Power cost = 722.4 × $0.12 = $86.69/day (~$2,601/month).

    Scale multiplies linearly — a few cents per kWh on a megawatt-scale farm is worth thousands per month.

  3. Night-only mining (12 h/day)

    3,500 W, 1 unit, 12 h/day, $0.18/kWh.

    kWh/day = 3.5 × 12 = 42. Cost = 42 × $0.18 = $7.56/day.

    Halving runtime halves the bill — useful if you only mine during off-peak TOU rates.

  4. Break-even power price

    84 kWh/day, $13.50/day mining revenue entered.

    Break-even = $13.50 ÷ 84 ≈ $0.1607/kWh.

    Below ~$0.161/kWh you profit; above it, electricity costs more than revenue at that revenue snapshot.

Frequently asked questions

How do I calculate mining electricity cost?
Multiply your miner’s watts by hours per day, divide by 1,000 for kWh, then multiply by your $/kWh rate. This tool does that for multiple rigs and shows day, week, month, and year totals.
What is a good electricity price for Bitcoin mining?
Many industrial miners target well under $0.08/kWh; home miners often struggle above $0.12–$0.15/kWh unless BTC price and difficulty are favorable. Enter your actual revenue to see your personal break-even $/kWh.
Should I use nameplate watts or measured draw?
Nameplate power from the manufacturer is a solid estimate. Measured draw at the wall (including PSU loss) is more accurate — enter custom watts if you have a meter reading.
Does this include cooling or facility overhead?
No. Add HVAC, fans, and facility load separately, or increase watts to a blended “all-in” figure per rack.
How do time-of-use (TOU) rates work?
If you pay different prices by hour, model an average $/kWh or run the calculator twice (peak vs off-peak hours) and add the costs.
What are the 120 V and 240 V amp estimates?
They are continuous current if the full miner load ran on single-phase at that voltage: amps = watts ÷ volts. Real installs use dedicated circuits, three-phase power, and safety margins — consult an electrician.
How does this relate to your mining profit calculators?
Use the Bitcoin or multi-coin mining calculator for daily revenue, then paste that USD figure here to subtract power and compare rates. Electricity cost is the same whether you mine BTC, LTC, or DOGE.
Is the CO₂ estimate accurate?
Only as good as the kg CO₂/kWh factor you enter (grid average). Renewable-heavy grids have lower factors; adjust for your region or supplier mix.

Related crypto tools

How it works

  • Choose an ASIC preset or enter watts per rig, how many machines you run, and hours powered per day.
  • Enter your $/kWh or pick a regional illustrative rate to see kWh and cost per day, week, month, and year.
  • Optionally paste daily mining revenue to see net profit, break-even electricity, amp estimates, and a comparison table at other $/kWh rates.

For education only — not financial advice. Past performance does not guarantee future results.